Modules and sets of Rpi
Raspberry Pi 3, model B, was developed based on the functionality of previous versions with a new, faster processor for increased speed. It is also equipped with WiFi and Bluetooth Low Energy for enriching the functionality and the ability to power larger devices via USB ports. The board has WiFi operating in two ranges 2.4 GHz and 5 GHz, Bluetooth 4.2 /...
Raspberry Pi 2B+/3B+ case The use of the casing protects the board against all kinds of mechanical damage as well as dirt and dust which could interfere with the long-term operation of the device. After closing the board, we still have access to all the necessary sockets and the system itself does not overheat due to ventilation holes.
Step down 9A 300W stepping down converterBy means of a smooth regulation depending on the input voltage (5-40V), we can set the output voltage in the range 1.25-35V. The maximum output current is 9A - additional cooling is required for this load.
Thermostat module with display does allow to drive a device with a maximum power of 2300W. Powered by a 12V power supply. Does regulate temperature in the range of -50 ° C-110 ° C with an integrated relay. Included waterproof probe NTC 10K with 30cm wire.
Wemos D1 UNO ESP32 WiFi Bluetooth with its pins header is compatible with popular microcontroller Arduino Uno. It does allow you to use it in already existing solutions. It can be programmed thru ArduinoIDE, for sure this fact does make using this microcontroller easier. The fact that you can use WiFi as well as Bluetooth makes that it is a perfect...
Thermostat W1209 with probe -50°C / +100°C - blue Thermostat module with display does allow to drive a device with a maximum power of 2300W. Powered by a 12V power supply. Does regulate temperature in the range of -50 ° C-110 ° C with an integrated relay. Included waterproof probe NTC 10K with 30cm wire.
BME280 is a sensor which can be used in a wide range of applications. For example, you can use it in simple Arduino projects. Integrated logic converter and voltage stabilizer make it work in both 3.3V and 5V logic. You can use it along with Raspberry Pi, STM32 or just simple Arduino.
Wemos D1 WROOM-2 ESP8266 WiFi Module 18650 is a microcontroller that is powered by popular 18650 cells. It can work for around 17 hours while powered with 3000mAh cell. Using this microcontroller is very similar to other ones based on ESP8266.
Wemos D1 Mini Pro 16M v1.0 is a microcontroller powered by MicroUSB socket. Using it is very similar to other ones using ESP8266. The mini pro version out of an increased capacity of flash memory, an integrated ceramic antenna for better Wifi range and CP2104 IC for programming ESP8266.