- Scratch resistant
- Good insulating properties
- Higher temperature resistance than PLA
Filament NOCTUO ABS green 0,75kg (acrylonitrile-butadiene-styrene copolymer) is the second most popular material after PLA used where it is necessary to have higher impact strength, hardness and scratch resistance from Polylactide.
It has good insulating properties and much higher temperature resistance than PLA. Printing it is a bit harder due to the greater shrinkage and less versatility of the substrate. The ABS filalment has ahigh gloss and has additives that improve resistance to UV radiation.
Technical specification:
- Printing temperature: 220 - 240 ° C
- Table temperature: 80-100 ° C
- Required table heating
- Heating in the chamber is not required, but suggested - at 80 ° C
- Net weight: 0.75 kg
Filament NOCTUO ABS green 0,75kg (acrylonitrile-butadiene-styrene copolymer) is the second most popular material after PLA used where it is necessary to have higher impact strength, hardness and scratch resistance from Polylactide.
It has good insulating properties and much higher temperature resistance than PLA. Printing it is a bit harder due to the greater shrinkage and less versatility of the substrate. The ABS filalment has ahigh gloss and has additives that improve resistance to UV radiation.
Technical specification:
- Printing temperature: 220 - 240 ° C
- Table temperature: 80-100 ° C
- Required table heating
- Heating in the chamber is not required, but suggested - at 80 ° C
- Net weight: 0.75 kg
- Type of filament
- ABS
- Colour
- Green
- Filament diameter
- 1,75mm
- Bed temperature
- 90 °C
- Nozzle temperature
- 220 - 240 °C
- Printing speed
- max 65 mm/s
- Density
- 1.04 g/cm3
- Required chamber
- No
Filament NOCTUO ABS green 0,75kg (acrylonitrile-butadiene-styrene copolymer) is the second most popular material after PLA used where it is necessary to have higher impact strength, hardness and scratch resistance from Polylactide.
It has good insulating properties and much higher temperature resistance than PLA. Printing it is a bit harder due to the greater shrinkage and less versatility of the substrate. The ABS filalment has ahigh gloss and has additives that improve resistance to UV radiation.
Technical specification:
- Printing temperature: 220 - 240 ° C
- Table temperature: 80-100 ° C
- Required table heating
- Heating in the chamber is not required, but suggested - at 80 ° C
- Net weight: 0.75 kg
- Type of filament
- ABS
- Colour
- Green
- Filament diameter
- 1,75mm
- Bed temperature
- 90 °C
- Nozzle temperature
- 220 - 240 °C
- Printing speed
- max 65 mm/s
- Density
- 1.04 g/cm3
- Required chamber
- No